11.x 文字列 Laravel

イントロダクションIntroduction

Laravelには、文字列値を操作する様々な関数があります。これらの関数の多くはフレームワーク自体で使用されていますが、便利に感じるなら、あなたのアプリケーションでも自由にご利用ください。Laravel includes a variety of functions for manipulating string values. Many of these functions are used by the framework itself; however, you are free to use them in your own applications if you find them convenient.

利用可能なメソッドAvailable Methods

文字列Strings

__ class_basename e preg_replace_array Str::after Str::afterLast Str::apa Str::ascii Str::before Str::beforeLast Str::between Str::betweenFirst Str::camel Str::charAt Str::contains Str::containsAll Str::endsWith Str::excerpt Str::finish Str::headline Str::inlineMarkdown Str::is Str::isAscii Str::isJson Str::isUlid Str::isUrl Str::isUuid Str::kebab Str::lcfirst Str::length Str::limit Str::lower Str::markdown Str::mask Str::orderedUuid Str::padBoth Str::padLeft Str::padRight Str::password Str::plural Str::pluralStudly Str::position Str::random Str::remove Str::repeat Str::replace Str::replaceArray Str::replaceFirst Str::replaceLast Str::replaceMatches Str::replaceStart Str::replaceEnd Str::reverse Str::singular Str::slug Str::snake Str::squish Str::start Str::startsWith Str::studly Str::substr Str::substrCount Str::substrReplace Str::swap Str::take Str::title Str::toBase64 Str::toHtmlString Str::trim Str::ltrim Str::rtrim Str::ucfirst Str::ucsplit Str::upper Str::ulid Str::unwrap Str::uuid Str::wordCount Str::wordWrap Str::words Str::wrap str trans trans_choice

Fluent文字列Fluent Strings

after afterLast apa append ascii basename before beforeLast between betweenFirst camel charAt classBasename contains containsAll dirname endsWith excerpt exactly explode finish headline inlineMarkdown is isAscii isEmpty isNotEmpty isJson isUlid isUrl isUuid kebab lcfirst length limit lower markdown mask match matchAll isMatch newLine padBoth padLeft padRight pipe plural position prepend remove repeat replace replaceArray replaceFirst replaceLast replaceMatches replaceStart replaceEnd scan singular slug snake split squish start startsWith stripTags studly substr substrReplace swap take tap test title toBase64 trim ltrim rtrim ucfirst ucsplit unwrap upper when whenContains whenContainsAll whenEmpty whenNotEmpty whenStartsWith whenEndsWith whenExactly whenNotExactly whenIs whenIsAscii whenIsUlid whenIsUuid whenTest wordCount words

文字列Strings

`()` `()`

__関数は、指定する翻訳文字列や翻訳キーを言語ファイルを使って翻訳します。The __ function translates the given translation string or translation key using your language files[/docs/{{version}}/localization]:

echo __('Welcome to our application');

echo __('messages.welcome');

指定した翻訳文字列や翻訳キーが存在しない場合、__関数は指定値をそのまま返します。たとえば、上記の場合に翻訳キーが存在しなければ、__関数はmessages.welcomeを返します。If the specified translation string or key does not exist, the __ function will return the given value. So, using the example above, the __ function would return messages.welcome if that translation key does not exist.

`class_basename()` `class_basename()`

class_basename関数は、指定クラスの名前から名前空間を取り除いて返します。The class_basename function returns the class name of the given class with the class's namespace removed:

$class = class_basename('Foo\Bar\Baz');

// Baz

`e()` `e()`

e関数は、PHPのhtmlspecialchars関数をdouble_encodeオプションにデフォルトでtrueを指定し、実行します。The e function runs PHP's htmlspecialchars function with the double_encode option set to true by default:

echo e('<html>foo</html>');

// &lt;html&gt;foo&lt;/html&gt;

`preg_replace_array()` `preg_replace_array()`

preg_replace_array関数は、指定パターンを順番に配列中の値に置き換えます。The preg_replace_array function replaces a given pattern in the string sequentially using an array:

$string = 'The event will take place between :start and :end';

$replaced = preg_replace_array('/:[a-z_] /', ['8:30', '9:00'], $string);

// The event will take place between 8:30 and 9:00

`Str::after()` `Str::after()`

Str::after関数は、指定値に続く文字列をすべて返します。文字列中に指定値が存在しない場合は、文字列全体を返します。The Str::after method returns everything after the given value in a string. The entire string will be returned if the value does not exist within the string:

use Illuminate\Support\Str;

$slice = Str::after('This is my name', 'This is');

// ' my name'

`Str::afterLast()` `Str::afterLast()`

Str::afterLastメソッドは、文字列で指定値が現れる最後の場所から、後ろの部分を返します。文字列中に指定値が存在しない場合は、文字列全体を返します。The Str::afterLast method returns everything after the last occurrence of the given value in a string. The entire string will be returned if the value does not exist within the string:

use Illuminate\Support\Str;

$slice = Str::afterLast('App\Http\Controllers\Controller', '\');

// 'Controller'

`Str::apa()` `Str::apa()`

Str::apaメソッドは指定文字列をAPAガイドラインに従ってタイトルケースに変換します。The Str::apa method converts the given string to title case following the APA guidelines[https://apastyle.apa.org/style-grammar-guidelines/capitalization/title-case]:

use Illuminate\Support\Str;

$title = Str::apa('Creating A Project');

// 'Creating a Project'

`Str::ascii()` `Str::ascii()`

Str::asciiメソッドは文字列をASCII値へ変換しようと試みます。The Str::ascii method will attempt to transliterate the string into an ASCII value:

use Illuminate\Support\Str;

$slice = Str::ascii('û');

// 'u'

`Str::before()` `Str::before()`

Str::before関数は、文字列中の指定値より前の文字列を全部返します。The Str::before method returns everything before the given value in a string:

use Illuminate\Support\Str;

$slice = Str::before('This is my name', 'my name');

// 'This is '

`Str::beforeLast()` `Str::beforeLast()`

Str::beforeLastメソッドは、文字列で指定値が現れる最後の場所から、前の部分を返します。The Str::beforeLast method returns everything before the last occurrence of the given value in a string:

use Illuminate\Support\Str;

$slice = Str::beforeLast('This is my name', 'is');

// 'This '

`Str::between()` `Str::between()`

Str::betweenメソッドは、２つの値間の部分文字列を返します。The Str::between method returns the portion of a string between two values:

use Illuminate\Support\Str;

$slice = Str::between('This is my name', 'This', 'name');

// ' is my '

`Str::betweenFirst()` `Str::betweenFirst()`

Str::betweenFirstメソッドは、２つの値の間にある文字列のうち、可能な限り小さい部分を返します。The Str::betweenFirst method returns the smallest possible portion of a string between two values:

use Illuminate\Support\Str;

$slice = Str::betweenFirst('[a] bc [d]', '[', ']');

// 'a'

`Str::camel()` `Str::camel()`

Str::camelメソッドは、文字列をキャメルケース（camelCase）へ変換します。The Str::camel method converts the given string to camelCase:

use Illuminate\Support\Str;

$converted = Str::camel('foo_bar');

// 'fooBar'

`Str::charAt()` `Str::charAt()`

Str::charAtメソッドは、指定インデックスの文字を返します。インデックスが範囲外の場合はfalseを返します。The Str::charAt method returns the character at the specified index. If the index is out of bounds, false is returned:

use Illuminate\Support\Str;

$character = Str::charAt('This is my name.', 6);

// 's'

`Str::contains()` `Str::contains()`

Str::containsメソッドは、指定文字列に指定値が含まれているかどうかを判別します。このメソッドは大文字と小文字を区別します。The Str::contains method determines if the given string contains the given value. This method is case sensitive:

use Illuminate\Support\Str;

$contains = Str::contains('This is my name', 'my');

// true

値の配列を渡して、指定文字列に配列内の値が含まれているかどうかを判断することもできます。You may also pass an array of values to determine if the given string contains any of the values in the array:

use Illuminate\Support\Str;

$contains = Str::contains('This is my name', ['my', 'foo']);

// true

`Str::containsAll()` `Str::containsAll()`

Str::containsAllメソッドは、指定文字列に指定配列のすべての値が含まれているかどうかを判別します。The Str::containsAll method determines if the given string contains all of the values in a given array:

use Illuminate\Support\Str;

$containsAll = Str::containsAll('This is my name', ['my', 'name']);

// true

`Str::endsWith()` `Str::endsWith()`

Str::endsWithメソッドは、最初の文字列が２つ目の引数の文字列で終わっているか判定します。The Str::endsWith method determines if the given string ends with the given value:

use Illuminate\Support\Str;

$result = Str::endsWith('This is my name', 'name');

// true

値の配列を渡し、指定文字列が配列内の値のいずれかで終わるかどうかを判断することもできます。You may also pass an array of values to determine if the given string ends with any of the values in the array:

use Illuminate\Support\Str;

$result = Str::endsWith('This is my name', ['name', 'foo']);

// true

$result = Str::endsWith('This is my name', ['this', 'foo']);

// false

`Str::excerpt()` `Str::excerpt()`

Str::excerptメソッドは指定した文字列から、その文字列内のフレーズの最初のインスタンスにマッチする部分を抜き出します。The Str::excerpt method extracts an excerpt from a given string that matches the first instance of a phrase within that string:

use Illuminate\Support\Str;

$excerpt = Str::excerpt('This is my name', 'my', [
    'radius' => 3
]);

// '...is my na...'

radiusオプションはデフォルトが100で、抜き出した文字列の両側に表示する文字数を定義します。The radius option, which defaults to 100, allows you to define the number of characters that should appear on each side of the truncated string.

さらに、omissionオプションを使い、抜き出した文字列の前後に追加する文字列を定義できます。In addition, you may use the omission option to define the string that will be prepended and appended to the truncated string:

use Illuminate\Support\Str;

$excerpt = Str::excerpt('This is my name', 'name', [
    'radius' => 3,
    'omission' => '(...) '
]);

// '(...) my name'

`Str::finish()` `Str::finish()`

Str::finishメソッドは、指定値で終わっていない場合、その値の単一のインスタンスを文字列に追加します。The Str::finish method adds a single instance of the given value to a string if it does not already end with that value:

use Illuminate\Support\Str;

$adjusted = Str::finish('this/string', '/');

// this/string/

$adjusted = Str::finish('this/string/', '/');

// this/string/

`Str::headline()` `Str::headline()`

Str::headlineメソッドは、大・小文字、ハイフン、アンダースコアにより区切られた文字列から、各単語の最初の文字を大文字にしたスペース区切りの文字列へ変換します。The Str::headline method will convert strings delimited by casing, hyphens, or underscores into a space delimited string with each word's first letter capitalized:

use Illuminate\Support\Str;

$headline = Str::headline('steve_jobs');

// Steve Jobs

$headline = Str::headline('EmailNotificationSent');

// Email Notification Sent

`Str::inlineMarkdown()` `Str::inlineMarkdown()`

Str::inlineMarkdownメソッドは、GitHub仕様のMarkdownをCommonMarkにより、インラインHTMLへ変換します。しかし、markdownメソッドとは異なり、生成したすべてのHTMLをブロックレベルの要素中へラップはできません。The Str::inlineMarkdown method converts GitHub flavored Markdown into inline HTML using CommonMark[https://commonmark.thephpleague.com/]. However, unlike the markdown method, it does not wrap all generated HTML in a block-level element:

use Illuminate\Support\Str;

$html = Str::inlineMarkdown('**Laravel**');

// <strong>Laravel</strong>

Markdownの安全性Markdown Security

デフォルトでMarkdownは素のHTMLをサポートしており、ユーザー入力を直接使用すると、クロスサイト・スクリプティング（XSS）の脆弱性が生まれます。CommonMarkの安全性のドキュメントにあるように、html_inputオプションを使い、素のHTMLをエスケープ処理もしくは除去できます。また、allow_unsafe_linksオプションを使って安全でないリンクを許可するかも指定できます。素のHTMLを許可する必要がある場合は、コンパイル済みのMarkdownをHTML Purifierへ通す必要があります。By default, Markdown supports raw HTML, which will expose Cross-Site Scripting (XSS) vulnerabilities when used with raw user input. As per the CommonMark Security documentation[https://commonmark.thephpleague.com/security/], you may use the html_input option to either escape or strip raw HTML, and the allow_unsafe_links option to specify whether to allow unsafe links. If you need to allow some raw HTML, you should pass your compiled Markdown through an HTML Purifier:

use Illuminate\Support\Str;

Str::inlineMarkdown('Inject: <script>alert("Hello XSS!");</script>', [
    'html_input' => 'strip',
    'allow_unsafe_links' => false,
]);

// Inject: alert(&quot;Hello XSS!&quot;);

`Str::is()` `Str::is()`

Str::isメソッドは、指定文字列が指定パターンに一致するかどうかを判別します。アスタリスクをワイルドカード値として使用できます。The Str::is method determines if a given string matches a given pattern. Asterisks may be used as wildcard values:

use Illuminate\Support\Str;

$matches = Str::is('foo*', 'foobar');

// true

$matches = Str::is('baz*', 'foobar');

// false

`Str::isAscii()` `Str::isAscii()`

Str::isAsciiメソッドは、指定文字列が7ビットASCIIであるかを判定します。The Str::isAscii method determines if a given string is 7 bit ASCII:

use Illuminate\Support\Str;

$isAscii = Str::isAscii('Taylor');

// true

$isAscii = Str::isAscii('ü');

// false

`Str::isJson()` `Str::isJson()`

Str::isJsonメソッドは、指定文字列が有効なJSONであるかを判定します。The Str::isJson method determines if the given string is valid JSON:

use Illuminate\Support\Str;

$result = Str::isJson('[1,2,3]');

// true

$result = Str::isJson('{"first": "John", "last": "Doe"}');

// true

$result = Str::isJson('{first: "John", last: "Doe"}');

// false

`Str::isUrl()` `Str::isUrl()`

Str::isUrlメソッドは、指定文字列が有効なURLかを判定します。The Str::isUrl method determines if the given string is a valid URL:

use Illuminate\Support\Str;

$isUrl = Str::isUrl('http://example.com');

// true

$isUrl = Str::isUrl('laravel');

// false

isUrl メソッドは幅広いプロトコルを有効とみなします。しかし、isUrlメソッドへ有効なプロトコルを指定することもできます。The isUrl method considers a wide range of protocols as valid. However, you may specify the protocols that should be considered valid by providing them to the isUrl method:

$isUrl = Str::isUrl('http://example.com', ['http', 'https']);

`Str::isUlid()` `Str::isUlid()`

Str::isUlidメソッドは、指定文字列が有効なULIDであることを判定します。The Str::isUlid method determines if the given string is a valid ULID:

use Illuminate\Support\Str;

$isUlid = Str::isUlid('01gd6r360bp37zj17nxb55yv40');

// true

$isUlid = Str::isUlid('laravel');

// false

`Str::isUuid()` `Str::isUuid()`

Str::isUuidメソッドは、指定した文字列が有効なUUIDであることを判定します。The Str::isUuid method determines if the given string is a valid UUID:

use Illuminate\Support\Str;

$isUuid = Str::isUuid('a0a2a2d2-0b87-4a18-83f2-2529882be2de');

// true

$isUuid = Str::isUuid('laravel');

// false

`Str::kebab()` `Str::kebab()`

Str::kebabメソッドは、指定した文字列をケバブケース（kebab-case）に変換します。The Str::kebab method converts the given string to kebab-case:

use Illuminate\Support\Str;

$converted = Str::kebab('fooBar');

// foo-bar

`Str::lcfirst()` `Str::lcfirst()`

Str::lcfirstメソッドは、指定した文字列の最初の文字を小文字に変換して返します。The Str::lcfirst method returns the given string with the first character lowercased:

use Illuminate\Support\Str;

$string = Str::lcfirst('Foo Bar');

// foo Bar

`Str::length()` `Str::length()`

Str::lengthメソッドは、指定文字列の長さを返します。The Str::length method returns the length of the given string:

use Illuminate\Support\Str;

$length = Str::length('Laravel');

// 7

`Str::limit()` `Str::limit()`

Str::limitメソッドは、指定文字列を指定する長さへ切り捨てます。The Str::limit method truncates the given string to the specified length:

use Illuminate\Support\Str;

$truncated = Str::limit('The quick brown fox jumps over the lazy dog', 20);

// The quick brown fox...

メソッドに３番目の引数を渡し、切り捨てる文字列の末尾へ追加する文字列を変更できます。You may pass a third argument to the method to change the string that will be appended to the end of the truncated string:

use Illuminate\Support\Str;

$truncated = Str::limit('The quick brown fox jumps over the lazy dog', 20, ' (...)');

// The quick brown fox (...)

`Str::lower()` `Str::lower()`

Str::lowerメソッドは指定文字列を小文字に変換します。The Str::lower method converts the given string to lowercase:

use Illuminate\Support\Str;

$converted = Str::lower('LARAVEL');

// laravel

`Str::markdown()` `Str::markdown()`

Str::markdownメソッドは、GitHub風なマークダウンをHTMLへ、CommonMarkを用い変換します。The Str::markdown method converts GitHub flavored Markdown into HTML using CommonMark[https://commonmark.thephpleague.com/]:

use Illuminate\Support\Str;

$html = Str::markdown('# Laravel');

// <h1>Laravel</h1>

$html = Str::markdown('# Taylor <b>Otwell</b>', [
    'html_input' => 'strip',
]);

// <h1>Taylor Otwell</h1>

Markdownの安全性Markdown Security

use Illuminate\Support\Str;

Str::markdown('Inject: <script>alert("Hello XSS!");</script>', [
    'html_input' => 'strip',
    'allow_unsafe_links' => false,
]);

// <p>Inject: alert(&quot;Hello XSS!&quot;);</p>

`Str::mask()` `Str::mask()`

Str::maskメソッドは、文字列の一部を繰り返し文字でマスクし、メールアドレスや電話番号などの文字列の一部を難読化するために使用します。The Str::mask method masks a portion of a string with a repeated character, and may be used to obfuscate segments of strings such as email addresses and phone numbers:

use Illuminate\Support\Str;

$string = Str::mask('taylor@example.com', '*', 3);

// tay***************

必要であれば、maskメソッドの第３引数に負の数を指定し、文字列の最後から指定する文字数分戻った箇所からマスキングを開始するように指示できます。If needed, you provide a negative number as the third argument to the mask method, which will instruct the method to begin masking at the given distance from the end of the string:

$string = Str::mask('taylor@example.com', '*', -15, 3);

// tay***@example.com

`Str::orderedUuid()` `Str::orderedUuid()`

Str::orderedUuidメソッドは、インデックス付きデータベース列に効率的に格納できる「タイムスタンプファースト」UUIDを生成します。このメソッドを使用して生成した各UUIDは、以前にこのメソッドを使用して生成されたUUIDの後にソートされます。The Str::orderedUuid method generates a "timestamp first" UUID that may be efficiently stored in an indexed database column. Each UUID that is generated using this method will be sorted after UUIDs previously generated using the method:

use Illuminate\Support\Str;

return (string) Str::orderedUuid();

`Str::padBoth()` `Str::padBoth()`

Str::padBothメソッドは、PHPのstr_pad関数をラップし、最後の文字列が目的の長さに達するまで、文字列の両側を別の文字列でパディングします。The Str::padBoth method wraps PHP's str_pad function, padding both sides of a string with another string until the final string reaches a desired length:

use Illuminate\Support\Str;

$padded = Str::padBoth('James', 10, '_');

// '__James___'

$padded = Str::padBoth('James', 10);

// '  James   '

`Str::padLeft()` `Str::padLeft()`

String::padLeftメソッドは、PHPのstr_pad関数をラップし、最後の文字列が目的の長さに達するまで、文字列の左側を別の文字列でパディングします。The Str::padLeft method wraps PHP's str_pad function, padding the left side of a string with another string until the final string reaches a desired length:

use Illuminate\Support\Str;

$padded = Str::padLeft('James', 10, '-=');

// '-=-=-James'

$padded = Str::padLeft('James', 10);

// '     James'

`Str::padRight()` `Str::padRight()`

String::padRightメソッドは、PHPのstr_pad関数をラップし、最後の文字列が目的の長さに達するまで、文字列の右側を別の文字列でパディングします。The Str::padRight method wraps PHP's str_pad function, padding the right side of a string with another string until the final string reaches a desired length:

use Illuminate\Support\Str;

$padded = Str::padRight('James', 10, '-');

// 'James-----'

$padded = Str::padRight('James', 10);

// 'James     '

`Str::password()` `Str::password()`

Str::passwordメソッドは、指定した長さの安全でランダムなパスワードを生成します。パスワードは文字、数字、シンボル、スペースの組み合わせで構成します。パスワードの長さは、デフォルトで３２文字です。The Str::password method may be used to generate a secure, random password of a given length. The password will consist of a combination of letters, numbers, symbols, and spaces. By default, passwords are 32 characters long:

use Illuminate\Support\Str;

$password = Str::password();

// 'EbJo2vE-AS:U,$%_gkrV4n,q~1xy/-_4'

$password = Str::password(12);

// 'qwuar>#V|i]N'

`Str::plural()` `Str::plural()`

Str::pluralメソッドは、単数形の単語文字列を複数形に変換します。この関数は、Laravelの複数形化機能により、どんな言語もサポートしています。The Str::plural method converts a singular word string to its plural form. This function supports any of the languages support by Laravel's pluralizer[/docs/{{version}}/localization#pluralization-language]:

use Illuminate\Support\Str;

$plural = Str::plural('car');

// cars

$plural = Str::plural('child');

// children

整数をこのメソッドの第２引数に指定することで、文字列の単数形と複数形を切り替えて取得できます。You may provide an integer as a second argument to the function to retrieve the singular or plural form of the string:

use Illuminate\Support\Str;

$plural = Str::plural('child', 2);

// children

$singular = Str::plural('child', 1);

// child

`Str::pluralStudly()` `Str::pluralStudly()`

Str::pluralStudlyメソッドは、アッパーキャメルケースでフォーマットされた文字列の単語を複数形に変換します。この関数は、Laravelの複数形化機能により、どんな言語もサポートしています。The Str::pluralStudly method converts a singular word string formatted in studly caps case to its plural form. This function supports any of the languages support by Laravel's pluralizer[/docs/{{version}}/localization#pluralization-language]:

use Illuminate\Support\Str;

$plural = Str::pluralStudly('VerifiedHuman');

// VerifiedHumans

$plural = Str::pluralStudly('UserFeedback');

// UserFeedback

use Illuminate\Support\Str;

$plural = Str::pluralStudly('VerifiedHuman', 2);

// VerifiedHumans

$singular = Str::pluralStudly('VerifiedHuman', 1);

// VerifiedHuman

`Str::position()` `Str::position()`

Str::positionメソッドは、文字列内で部分文字列が最初に出現する位置を返します。部分文字列が指定した文字列内に存在しない場合は、falseを返します。The Str::position method returns the position of the first occurrence of a substring in a string. If the substring does not exist in the given string, false is returned:

use Illuminate\Support\Str;

$position = Str::position('Hello, World!', 'Hello');

// 0

$position = Str::position('Hello, World!', 'W');

// 7

`Str::random()` `Str::random()`

Str::randomメソッドは指定した長さのランダムな文字列を生成します。このメソッドは、PHPのrandom_bytes関数を使用します。The Str::random method generates a random string of the specified length. This function uses PHP's random_bytes function:

use Illuminate\Support\Str;

$random = Str::random(40);

テスト中に、Str::randomメソッドが返す値を「Fake」できると便利でしょう。これを行うには、createRandomStringsUsingメソッドを使用します。During testing, it may be useful to "fake" the value that is returned by the Str::random method. To accomplish this, you may use the createRandomStringsUsing method:

Str::createRandomStringsUsing(function () {
    return 'fake-random-string';
});

randomメソッドへ、通常通りのランダム文字列の生成に戻るよう指示するには、createRandomStringsNormallyメソッドを呼び出します。To instruct the random method to return to generating random strings normally, you may invoke the createRandomStringsNormally method:

Str::createRandomStringsNormally();

`Str::remove()` `Str::remove()`

Str::removeメソッドは、文字列から指定する値または値の配列を削除します。The Str::remove method removes the given value or array of values from the string:

use Illuminate\Support\Str;

$string = 'Peter Piper picked a peck of pickled peppers.';

$removed = Str::remove('e', $string);

// Ptr Pipr pickd a pck of pickld ppprs.

文字列を削除するときにケースを無視するには、removeメソッドの３番目の引数にfalseを渡してください。You may also pass false as a third argument to the remove method to ignore case when removing strings.

`Str::repeat()` `Str::repeat()`

Str::repeatメソッドは、指定文字列を繰り返します。The Str::repeat method repeats the given string:

use Illuminate\Support\Str;

$string = 'a';

$repeat = Str::repeat($string, 5);

// aaaaa

`Str::replace()` `Str::replace()`

Str::replaceメソッドは、文字列内の指定した文字列を置き換えます。The Str::replace method replaces a given string within the string:

use Illuminate\Support\Str;

$string = 'Laravel 10.x';

$replaced = Str::replace('10.x', '11.x', $string);

// Laravel 11.x

replaceメソッドは、caseSensitive引数も指定できます。デフォルトでreplaceメソッドは、大・小文字を区別します。The replace method also accepts a caseSensitive argument. By default, the replace method is case sensitive:

Str::replace('Framework', 'Laravel', caseSensitive: false);

`Str::replaceArray()` `Str::replaceArray()`

Str::replaceArrayメソッドは配列を使い、文字列を指定値へ順番に置き換えます。The Str::replaceArray method replaces a given value in the string sequentially using an array:

use Illuminate\Support\Str;

$string = 'The event will take place between ? and ?';

$replaced = Str::replaceArray('?', ['8:30', '9:00'], $string);

// The event will take place between 8:30 and 9:00

`Str::replaceFirst()` `Str::replaceFirst()`

Str::replaceFirstメソッドは、文字列中で最初に出現した値を指定値で置き換えます。The Str::replaceFirst method replaces the first occurrence of a given value in a string:

use Illuminate\Support\Str;

$replaced = Str::replaceFirst('the', 'a', 'the quick brown fox jumps over the lazy dog');

// a quick brown fox jumps over the lazy dog

`Str::replaceLast()` `Str::replaceLast()`

Str::replaceLastメソッドは、文字列中で最後に出現した値を指定値で置き換えます。The Str::replaceLast method replaces the last occurrence of a given value in a string:

use Illuminate\Support\Str;

$replaced = Str::replaceLast('the', 'a', 'the quick brown fox jumps over the lazy dog');

// the quick brown fox jumps over a lazy dog

`Str::replaceMatches()` `Str::replaceMatches()`

Str::replaceMatchesメソッドは、パターンと一致する全ての文字列を指定置換文字列に置き換えます。The Str::replaceMatches method replaces all portions of a string matching a pattern with the given replacement string:

use Illuminate\Support\Str;

$replaced = Str::replaceMatches(
    pattern: '/[^A-Za-z0-9]  /',
    replace: '',
    subject: '( 1) 501-555-1000'
)

// '15015551000'

replaceMatchesメソッドは、指定パターンと一致する文字列の各部分で呼び出すクロージャも引数に取ります。クロージャ内で置換ロジックを実行し、置換済みの値を返してください。The replaceMatches method also accepts a closure that will be invoked with each portion of the string matching the given pattern, allowing you to perform the replacement logic within the closure and return the replaced value:

use Illuminate\Support\Str;

$replaced = Str::replaceMatches('/\d/', function (array $matches) {
    return '['.$matches[0].']';
}, '123');

// '[1][2][3]'

`Str::replaceStart()` `Str::replaceStart()`

Str::replaceStartメソッドは、指定値が文字列の最初に現れる場合のみ、その値を置き換えます。The Str::replaceStart method replaces the first occurrence of the given value only if the value appears at the start of the string:

use Illuminate\Support\Str;

$replaced = Str::replaceStart('Hello', 'Laravel', 'Hello World');

// Laravel World

$replaced = Str::replaceStart('World', 'Laravel', 'Hello World');

// Hello World

`Str::replaceEnd()` `Str::replaceEnd()`

Str::replaceEndメソッドは、指定値が文字列の最後に現れる場合のみ、その値を置き換えます。The Str::replaceEnd method replaces the last occurrence of the given value only if the value appears at the end of the string:

use Illuminate\Support\Str;

$replaced = Str::replaceEnd('World', 'Laravel', 'Hello World');

// Hello Laravel

$replaced = Str::replaceEnd('Hello', 'Laravel', 'Hello World');

// Hello World

`Str::reverse()` `Str::reverse()`

Str::reverseメソッドは、指定文字列を逆順にします。The Str::reverse method reverses the given string:

use Illuminate\Support\Str;

$reversed = Str::reverse('Hello World');

// dlroW olleH

`Str::singular()` `Str::singular()`

Str::singularメソッドは複数形を単数形へ変換します。この関数は、Laravelの複数形化機能により、どんな言語もサポートしています。The Str::singular method converts a string to its singular form. This function supports any of the languages support by Laravel's pluralizer[/docs/{{version}}/localization#pluralization-language]:

use Illuminate\Support\Str;

$singular = Str::singular('cars');

// car

$singular = Str::singular('children');

// child

`Str::slug()` `Str::slug()`

Str::slugメソッドは指定された文字列から、URLフレンドリーな「スラグ」を生成します。The Str::slug method generates a URL friendly "slug" from the given string:

use Illuminate\Support\Str;

$slug = Str::slug('Laravel 5 Framework', '-');

// laravel-5-framework

`Str::snake()` `Str::snake()`

Str::snakeメソッドは文字列をスネークケース（snake_case）に変換します。The Str::snake method converts the given string to snake_case:

use Illuminate\Support\Str;

$converted = Str::snake('fooBar');

// foo_bar

$converted = Str::snake('fooBar', '-');

// foo-bar

`Str::squish()` `Str::squish()`

Str::squishメソッドは、単語間の余分な空白を含め、文字列から余分な空白をすべて削除します。The Str::squish method removes all extraneous white space from a string, including extraneous white space between words:

use Illuminate\Support\Str;

$string = Str::squish('    laravel    framework    ');

// laravel framework

`Str::start()` `Str::start()`

Str::startメソッドは、文字列が指定値で開始されていない場合、その値の単一インスタンスを文字列の前に追加します。The Str::start method adds a single instance of the given value to a string if it does not already start with that value:

use Illuminate\Support\Str;

$adjusted = Str::start('this/string', '/');

// /this/string

$adjusted = Str::start('/this/string', '/');

// /this/string

`Str::startsWith()` `Str::startsWith()`

Str::startsWithメソッドは指定文字列が、２番めの引数の文字列で始まっているか判定します。The Str::startsWith method determines if the given string begins with the given value:

use Illuminate\Support\Str;

$result = Str::startsWith('This is my name', 'This');

// true

可能な値の配列が渡された場合、startsWithメソッドは、文字列が与えられた値のいずれかで始まる場合にtrueを返します。If an array of possible values is passed, the startsWith method will return true if the string begins with any of the given values:

$result = Str::startsWith('This is my name', ['This', 'That', 'There']);

// true

`Str::studly()` `Str::studly()`

Str::studlyメソッドは文字列をアッパーキャメルケース（StudlyCase）に変換します。The Str::studly method converts the given string to StudlyCase:

use Illuminate\Support\Str;

$converted = Str::studly('foo_bar');

// FooBar

`Str::substr()` `Str::substr()`

Str::substrメソッドは開始位置と文字列長の引数で指定した部分文字列を返します。The Str::substr method returns the portion of string specified by the start and length parameters:

use Illuminate\Support\Str;

$converted = Str::substr('The Laravel Framework', 4, 7);

// Laravel

`Str::substrCount()` `Str::substrCount()`

Str::substrCountメソッドは、指定する文字列内に指定値がいくつ存在しているか返します。The Str::substrCount method returns the number of occurrences of a given value in the given string:

use Illuminate\Support\Str;

$count = Str::substrCount('If you like ice cream, you will like snow cones.', 'like');

// 2

`Str::substrReplace()` `Str::substrReplace()`

Str::substrReplaceメソッドは、文字列の一部分のテキストを置き換えます。第３引数で指定した位置から始まり、第４引数で指定した文字数分を置き換えます。このメソッドの第４引数へ0を渡すと、文字列内の既存の文字を一切置き換えず、指定位置に文字列を挿入します。The Str::substrReplace method replaces text within a portion of a string, starting at the position specified by the third argument and replacing the number of characters specified by the fourth argument. Passing 0 to the method's fourth argument will insert the string at the specified position without replacing any of the existing characters in the string:

use Illuminate\Support\Str;

$result = Str::substrReplace('1300', ':', 2);
// 13:

$result = Str::substrReplace('1300', ':', 2, 0);
// 13:00

`Str::swap()` `Str::swap()`

Str::swapメソッドは、PHPのstrtr関数を使い、指定した文字列中の複数の値を置き換えます。The Str::swap method replaces multiple values in the given string using PHP's strtr function:

use Illuminate\Support\Str;

$string = Str::swap([
    'Tacos' => 'Burritos',
    'great' => 'fantastic',
], 'Tacos are great!');

// Burritos are fantastic!

`Str::take()` `Str::take()`

Str::takeメソッドは、文字列の先頭から指定した文字数を返します。The Str::take method returns a specified number of characters from the beginning of a string:

use Illuminate\Support\Str;

$taken = Str::take('Build something amazing!', 5);

// Build

`Str::title()` `Str::title()`

Str::titleメソッドは、指定された文字列をタイトルケース（Title Case）へ変換します。The Str::title method converts the given string to Title Case:

use Illuminate\Support\Str;

$converted = Str::title('a nice title uses the correct case');

// A Nice Title Uses The Correct Case

`Str::toBase64()` `Str::toBase64()`

Str::toBase64メソッドは、指定文字列をBase64へ変換します。The Str::toBase64 method converts the given string to Base64:

use Illuminate\Support\Str;

$base64 = Str::toBase64('Laravel');

// TGFyYXZlbA==

`Str::toHtmlString()` `Str::toHtmlString()`

Str::toHtmlStringメソッドは、文字列インスタンスをIlluminate\Support\HtmlStringインスタンスに変換し、Blade テンプレートで表示できるようにします。The Str::toHtmlString method converts the string instance to an instance of Illuminate\Support\HtmlString, which may be displayed in Blade templates:

use Illuminate\Support\Str;

$htmlString = Str::of('Nuno Maduro')->toHtmlString();

`Str::trim()` `Str::trim()`

Str::trimメソッドは、指定した文字列の先頭と末尾から空白文字 (またはその他の文字) を除去します。PHPネイティブのtrim関数と異なり、Str::trimメソッドはユニコードの空白文字も除去します。The Str::trim method strips whitespace (or other characters) from the beginning and end of the given string. Unlike PHP's native trim function, the Str::trim method also removes unicode whitespace characters:

use Illuminate\Support\Str;

$string = Str::trim(' foo bar ');

// 'foo bar'

`Str::ltrim()` `Str::ltrim()`

Str::ltrimメソッドは、指定した文字列の先頭から空白文字 (またはその他の文字) を除去します。PHPネイティブのltrim関数と異なり、Str::ltrimメソッドはユニコードの空白文字も除去します。The Str::ltrim method strips whitespace (or other characters) from the beginning of the given string. Unlike PHP's native ltrim function, the Str::ltrim method also removes unicode whitespace characters:

use Illuminate\Support\Str;

$string = Str::ltrim('  foo bar  ');

// 'foo bar  '

`Str::rtrim()` `Str::rtrim()`

Str::rtrimメソッドは、与えられた文字列の末尾から空白文字 (またはその他の文字) を除去します。PHPネイティブのrtrim関数と異なり、Str::rtrimメソッドはユニコードの空白文字も除去します。The Str::rtrim method strips whitespace (or other characters) from the end of the given string. Unlike PHP's native rtrim function, the Str::rtrim method also removes unicode whitespace characters:

use Illuminate\Support\Str;

$string = Str::rtrim('  foo bar  ');

// '  foo bar'

`Str::ucfirst()` `Str::ucfirst()`

Str::ucfirstメソッドは、指定文字列の最初の文字を大文字にして返します。The Str::ucfirst method returns the given string with the first character capitalized:

use Illuminate\Support\Str;

$string = Str::ucfirst('foo bar');

// Foo bar

`Str::ucsplit()` `Str::ucsplit()`

Str::ucsplitメソッドは、指定した文字列を文字列を大文字で分割して配列にします。The Str::ucsplit method splits the given string into an array by uppercase characters:

use Illuminate\Support\Str;

$segments = Str::ucsplit('FooBar');

// [0 => 'Foo', 1 => 'Bar']

`Str::upper()` `Str::upper()`

Str::upperメソッドは、指定文字列を大文字に変換します。The Str::upper method converts the given string to uppercase:

use Illuminate\Support\Str;

$string = Str::upper('laravel');

// LARAVEL

`Str::ulid()` `Str::ulid()`

Str::ulidメソッドは、コンパクトで時間順に並んだ一意の識別子であるULIDを生成します。The Str::ulid method generates a ULID, which is a compact, time-ordered unique identifier:

use Illuminate\Support\Str;

return (string) Str::ulid();

// 01gd6r360bp37zj17nxb55yv40

指定したULIDが作成された日時を表すIlluminate\Support\Carbon日付インスタンスを取得したい場合、LaravelのCarbon統合が提供しているcreateFromIdメソッドを使用してください。If you would like to retrieve a Illuminate\Support\Carbon date instance representing the date and time that a given ULID was created, you may use the createFromId method provided by Laravel's Carbon integration:

use Illuminate\Support\Carbon;
use Illuminate\Support\Str;

$date = Carbon::createFromId((string) Str::ulid());

テスト中に、Str::ulidメソッドが返す値を「Fake」できると便利でしょう。これを行うには、createUlidsUsingメソッドを使用します。During testing, it may be useful to "fake" the value that is returned by the Str::ulid method. To accomplish this, you may use the createUlidsUsing method:

use Symfony\Component\Uid\Ulid;

Str::createUlidsUsing(function () {
    return new Ulid('01HRDBNHHCKNW2AK4Z29SN82T9');
});

ulidメソッドへ、通常通りのランダム文字列の生成に戻るよう指示するには、createUlidsNormallyメソッドを呼び出します。To instruct the ulid method to return to generating ULIDs normally, you may invoke the createUlidsNormally method:

Str::createUlidsNormally();

`Str::unwrap()` `Str::unwrap()`

Str::unwrapメソッドは、指定文字列の先頭と末尾から指定文字列を取り除きます。The Str::unwrap method removes the specified strings from the beginning and end of a given string:

use Illuminate\Support\Str;

Str::unwrap('-Laravel-', '-');

// Laravel

Str::unwrap('{framework: "Laravel"}', '{', '}');

// framework: "Laravel"

`Str::uuid()` `Str::uuid()`

Str::uuidメソッドは、UUID（バージョン４）を生成します。The Str::uuid method generates a UUID (version 4):

use Illuminate\Support\Str;

return (string) Str::uuid();

テスト中に、Str::uuidメソッドが返す値を「Fake」できると便利でしょう。これを行うには、createUuidsUsingメソッドを使用します。During testing, it may be useful to "fake" the value that is returned by the Str::uuid method. To accomplish this, you may use the createUuidsUsing method:

use Ramsey\Uuid\Uuid;

Str::createUuidsUsing(function () {
    return Uuid::fromString('eadbfeac-5258-45c2-bab7-ccb9b5ef74f9');
});

uuidメソッドへ、通常通りのランダム文字列の生成に戻るよう指示するには、createUuidsNormallyメソッドを呼び出します。To instruct the uuid method to return to generating UUIDs normally, you may invoke the createUuidsNormally method:

Str::createUuidsNormally();

`Str::wordCount()` `Str::wordCount()`

Str::wordCount関数は、文字列に含まれる単語の数を返します。The Str::wordCount method returns the number of words that a string contains:

use Illuminate\Support\Str;

Str::wordCount('Hello, world!'); // 2

`Str::wordWrap()` `Str::wordWrap()`

Str::wordWrapメソッドは、文字列を指定文字数で折り返します。The Str::wordWrap method wraps a string to a given number of characters:

use Illuminate\Support\Str;

$text = "The quick brown fox jumped over the lazy dog."

Str::wordWrap($text, characters: 20, break: "<br />\n");

/*
The quick brown fox<br />
jumped over the lazy<br />
dog.
*/

`Str::words()` `Str::words()`

Str::wordsメソッドは、文字列内の単語数を制限します。3番目の引数で、切り捨てた文字列の末尾に追加する文字列を指定できます。The Str::words method limits the number of words in a string. An additional string may be passed to this method via its third argument to specify which string should be appended to the end of the truncated string:

use Illuminate\Support\Str;

return Str::words('Perfectly balanced, as all things should be.', 3, ' >>>');

// Perfectly balanced, as >>>

`Str::wrap()` `Str::wrap()`

Str::wrapメソッドは、指定文字列を追加の文字列か文字列のペアでラップします。The Str::wrap method wraps the given string with an additional string or pair of strings:

use Illuminate\Support\Str;

Str::wrap('Laravel', '"');

// "Laravel"

Str::wrap('is', before: 'This ', after: ' Laravel!');

// This is Laravel!

`str()` `str()`

str関数は、指定した文字列の新しいIlluminate\Support\Stringableインスタンスを返します。この関数は Str::ofメソッドと等価です。The str function returns a new Illuminate\Support\Stringable instance of the given string. This function is equivalent to the Str::of method:

$string = str('Taylor')->append(' Otwell');

// 'Taylor Otwell'

str関数に引数を与えなかった場合、Illuminate\Support\Strのインスタンスを返します。If no argument is provided to the str function, the function returns an instance of Illuminate\Support\Str:

$snake = str()->snake('FooBar');

// 'foo_bar'

`trans()` `trans()`

trans関数は、指定した翻訳キーを言語ファイルを使い、翻訳します。The trans function translates the given translation key using your language files[/docs/{{version}}/localization]:

echo trans('messages.welcome');

指定した翻訳キーが存在しない場合、trans関数は指定値をそのまま返します。上記の場合に翻訳キーが存在しなければ、messages.welcomeが返ります。If the specified translation key does not exist, the trans function will return the given key. So, using the example above, the trans function would return messages.welcome if the translation key does not exist.

`trans_choice()` `trans_choice()`

trans_choice関数は、数値をもとにし、指定翻訳キーを翻訳します。The trans_choice function translates the given translation key with inflection:

echo trans_choice('messages.notifications', $unreadCount);

指定した翻訳キーが存在しない場合、trans_choice関数は指定値をそのまま返します。上記の場合に翻訳キーが存在しなければ、messages.welcomeが返ります。If the specified translation key does not exist, the trans_choice function will return the given key. So, using the example above, the trans_choice function would return messages.notifications if the translation key does not exist.

Fluent文字列Fluent Strings

Fluent文字列は読み書きしやすい（fluent）、オブジェクト指向で、複数の文字列操作をチェーンできるインターフェイスを提供します。古典的な文字列操作に比較すると、複数の文字列操作を読みやすい文法で使用できます。Fluent strings provide a more fluent, object-oriented interface for working with string values, allowing you to chain multiple string operations together using a more readable syntax compared to traditional string operations.

`after` `after`

after関数は、指定値に続く文字列をすべて返します。文字列中に指定値が存在しない場合は、文字列全体を返します。The after method returns everything after the given value in a string. The entire string will be returned if the value does not exist within the string:

use Illuminate\Support\Str;

$slice = Str::of('This is my name')->after('This is');

// ' my name'

`afterLast` `afterLast`

afterLastメソッドは、文字列で指定値が最後に現れる場所から、後ろの部分を返します。文字列中に指定値が存在しない場合は、文字列全体を返します。The afterLast method returns everything after the last occurrence of the given value in a string. The entire string will be returned if the value does not exist within the string:

use Illuminate\Support\Str;

$slice = Str::of('App\Http\Controllers\Controller')->afterLast('\\');

// 'Controller'

`apa` `apa`

apaメソッドは指定文字列をAPAガイドラインに従ってタイトルケースに変換します。The apa method converts the given string to title case following the APA guidelines[https://apastyle.apa.org/style-grammar-guidelines/capitalization/title-case]:

use Illuminate\Support\Str;

$converted = Str::of('a nice title uses the correct case')->apa();

// A Nice Title Uses the Correct Case

`append` `append`

appendメソッドは、指定値を文字列へ追加します。The append method appends the given values to the string:

use Illuminate\Support\Str;

$string = Str::of('Taylor')->append(' Otwell');

// 'Taylor Otwell'

`ascii` `ascii`

asciiメソッドは、文字列をアスキー値への変換を試みます。The ascii method will attempt to transliterate the string into an ASCII value:

use Illuminate\Support\Str;

$string = Str::of('ü')->ascii();

// 'u'

`basename` `basename`

basenameメソッドは、文字列の最後の名前部分を返します。The basename method will return the trailing name component of the given string:

use Illuminate\Support\Str;

$string = Str::of('/foo/bar/baz')->basename();

// 'baz'

必要であれば、最後の部分から削除したい「拡張子」を指定できます。If needed, you may provide an "extension" that will be removed from the trailing component:

use Illuminate\Support\Str;

$string = Str::of('/foo/bar/baz.jpg')->basename('.jpg');

// 'baz'

`before` `before`

before関数は、文字列中の指定値より前の文字列を全部返しますThe before method returns everything before the given value in a string:

use Illuminate\Support\Str;

$slice = Str::of('This is my name')->before('my name');

// 'This is '

`beforeLast` `beforeLast`

beforeLastメソッドは、文字列中で最初に指定値が現れる場所から、前の部分を返します。The beforeLast method returns everything before the last occurrence of the given value in a string:

use Illuminate\Support\Str;

$slice = Str::of('This is my name')->beforeLast('is');

// 'This '

`between` `between`

betweenメソッドは、２つの値の間にある文字列を返します。The between method returns the portion of a string between two values:

use Illuminate\Support\Str;

$converted = Str::of('This is my name')->between('This', 'name');

// ' is my '

`betweenFirst` `betweenFirst`

betweenFirstメソッドは、2つの値の間にある文字列のうち、可能な限り小さい部分を返します。The betweenFirst method returns the smallest possible portion of a string between two values:

use Illuminate\Support\Str;

$converted = Str::of('[a] bc [d]')->betweenFirst('[', ']');

// 'a'

`camel` `camel`

camelメソッドは、文字列をキャメルケース（camelCase）へ変換しますThe camel method converts the given string to camelCase:

use Illuminate\Support\Str;

$converted = Str::of('foo_bar')->camel();

// 'fooBar'

`charAt` `charAt`

charAtメソッドは指定インデックスの文字を返します。インデックスが範囲外の場合はfalseを返します。The charAt method returns the character at the specified index. If the index is out of bounds, false is returned:

use Illuminate\Support\Str;

$character = Str::of('This is my name.')->charAt(6);

// 's'

`classBasename` `classBasename`

classBasenameメソッドは、指定したクラスから名前空間を削除したクラス名を返す。The classBasename method returns the class name of the given class with the class's namespace removed:

use Illuminate\Support\Str;

$class = Str::of('Foo\Bar\Baz')->classBasename();

// 'Baz'

`contains` `contains`

containsメソッドは、指定された文字列に指定された値が含まれているかどうかを判別します。このメソッドは大文字と小文字を区別します。The contains method determines if the given string contains the given value. This method is case sensitive:

use Illuminate\Support\Str;

$contains = Str::of('This is my name')->contains('my');

// true

use Illuminate\Support\Str;

$contains = Str::of('This is my name')->contains(['my', 'foo']);

// true

`containsAll` `containsAll`

containsAllメソッドは、指定文字列に指定配列のすべての値が含まれているかどうかを判別します。The containsAll method determines if the given string contains all of the values in the given array:

use Illuminate\Support\Str;

$containsAll = Str::of('This is my name')->containsAll(['my', 'name']);

// true

`dirname` `dirname`

dirnameメソッドは文字列の親ディレクトリ名部分を返します。The dirname method returns the parent directory portion of the given string:

use Illuminate\Support\Str;

$string = Str::of('/foo/bar/baz')->dirname();

// '/foo/bar'

必要に応じて、文字列から削除するディレクトリレベル数を指定できます。If necessary, you may specify how many directory levels you wish to trim from the string:

use Illuminate\Support\Str;

$string = Str::of('/foo/bar/baz')->dirname(2);

// '/foo'

`excerpt` `excerpt`

excerptメソッドは文字列から、その文字列内のフレーズの最初のインスタンスにマッチする部分を抜粋して抜き出します。The excerpt method extracts an excerpt from the string that matches the first instance of a phrase within that string:

use Illuminate\Support\Str;

$excerpt = Str::of('This is my name')->excerpt('my', [
    'radius' => 3
]);

// '...is my na...'

さらに、omissionオプションを使い、抜き出した文字列の前後に追加する文字列を定義できます。In addition, you may use the omission option to change the string that will be prepended and appended to the truncated string:

use Illuminate\Support\Str;

$excerpt = Str::of('This is my name')->excerpt('name', [
    'radius' => 3,
    'omission' => '(...) '
]);

// '(...) my name'

`endsWith` `endsWith`

endsWithメソッドは、文字列が指定値で終わっているか判定します。The endsWith method determines if the given string ends with the given value:

use Illuminate\Support\Str;

$result = Str::of('This is my name')->endsWith('name');

// true

use Illuminate\Support\Str;

$result = Str::of('This is my name')->endsWith(['name', 'foo']);

// true

$result = Str::of('This is my name')->endsWith(['this', 'foo']);

// false

`exactly` `exactly`

exactlyメソッドは、文字列と指定値が完全に一致することを判定します。The exactly method determines if the given string is an exact match with another string:

use Illuminate\Support\Str;

$result = Str::of('Laravel')->exactly('Laravel');

// true

`explode` `explode`

explodeメソッドは文字列を指定デリミッタで分割し、分割した文字列を含むコレクションを返します。The explode method splits the string by the given delimiter and returns a collection containing each section of the split string:

use Illuminate\Support\Str;

$collection = Str::of('foo bar baz')->explode(' ');

// collect(['foo', 'bar', 'baz'])

`finish` `finish`

finishメソッドは、文字列が指定値で終わっていない場合、その値の単一のインスタンスを追加します。The finish method adds a single instance of the given value to a string if it does not already end with that value:

use Illuminate\Support\Str;

$adjusted = Str::of('this/string')->finish('/');

// this/string/

$adjusted = Str::of('this/string/')->finish('/');

// this/string/

`headline` `headline`

headlineメソッドは、大小文字、ハイフン、アンダースコアで区切られた文字列の各単語の頭文字を大文字にし、スペースで区切った文字列へ変換します。The headline method will convert strings delimited by casing, hyphens, or underscores into a space delimited string with each word's first letter capitalized:

use Illuminate\Support\Str;

$headline = Str::of('taylor_otwell')->headline();

// Taylor Otwell

$headline = Str::of('EmailNotificationSent')->headline();

// Email Notification Sent

`inlineMarkdown` `inlineMarkdown`

inlineMarkdownメソッドは、GitHub仕様のMarkdownをCommonMarkにより、インラインHTMLへ変換します。しかし、markdownメソッドとは異なり、生成したすべてのHTMLをブロックレベルの要素中へラップはできません。The inlineMarkdown method converts GitHub flavored Markdown into inline HTML using CommonMark[https://commonmark.thephpleague.com/]. However, unlike the markdown method, it does not wrap all generated HTML in a block-level element:

use Illuminate\Support\Str;

$html = Str::of('**Laravel**')->inlineMarkdown();

// <strong>Laravel</strong>

Markdownの安全性Markdown Security

use Illuminate\Support\Str;

Str::of('Inject: <script>alert("Hello XSS!");</script>')->inlineMarkdown([
    'html_input' => 'strip',
    'allow_unsafe_links' => false,
]);

// Inject: alert(&quot;Hello XSS!&quot;);

`is` `is`

isメソッドは、指定文字列が指定パターンに一致するかどうかを判別します。アスタリスクはワイルドカード値として使用できますThe is method determines if a given string matches a given pattern. Asterisks may be used as wildcard values

use Illuminate\Support\Str;

$matches = Str::of('foobar')->is('foo*');

// true

$matches = Str::of('foobar')->is('baz*');

// false

`isAscii` `isAscii`

isAsciiメソッドは、文字列がASCII文字列であるか判定します。The isAscii method determines if a given string is an ASCII string:

use Illuminate\Support\Str;

$result = Str::of('Taylor')->isAscii();

// true

$result = Str::of('ü')->isAscii();

// false

`isEmpty` `isEmpty`

isEmptyメソッドは、文字列が空であるか判定します。The isEmpty method determines if the given string is empty:

use Illuminate\Support\Str;

$result = Str::of('  ')->trim()->isEmpty();

// true

$result = Str::of('Laravel')->trim()->isEmpty();

// false

`isNotEmpty` `isNotEmpty`

isNotEmptyメソッドは、文字列が空でないかを判定します。The isNotEmpty method determines if the given string is not empty:

use Illuminate\Support\Str;

$result = Str::of('  ')->trim()->isNotEmpty();

// false

$result = Str::of('Laravel')->trim()->isNotEmpty();

// true

`isJson` `isJson`

isJsonメソッドは、指定文字列が有効なJSONであるかを判定します。The isJson method determines if a given string is valid JSON:

use Illuminate\Support\Str;

$result = Str::of('[1,2,3]')->isJson();

// true

$result = Str::of('{"first": "John", "last": "Doe"}')->isJson();

// true

$result = Str::of('{first: "John", last: "Doe"}')->isJson();

// false

`isUlid` `isUlid`

isUlidメソッドは、指定文字列が有効なULIDであることを判定します。The isUlid method determines if a given string is a ULID:

use Illuminate\Support\Str;

$result = Str::of('01gd6r360bp37zj17nxb55yv40')->isUlid();

// true

$result = Str::of('Taylor')->isUlid();

// false

`isUrl` `isUrl`

isUrlメソッドは、指定文字列がURLであるか判定します。The isUrl method determines if a given string is a URL:

use Illuminate\Support\Str;

$result = Str::of('http://example.com')->isUrl();

// true

$result = Str::of('Taylor')->isUrl();

// false

$result = Str::of('http://example.com')->isUrl(['http', 'https']);

`isUuid` `isUuid`

isUuidメソッドは、文字列がUUIDかを判定します。The isUuid method determines if a given string is a UUID:

use Illuminate\Support\Str;

$result = Str::of('5ace9ab9-e9cf-4ec6-a19d-5881212a452c')->isUuid();

// true

$result = Str::of('Taylor')->isUuid();

// false

`kebab` `kebab`

kebabメソッドは、文字列をケバブケース（kebab-case）へ変換します。The kebab method converts the given string to kebab-case:

use Illuminate\Support\Str;

$converted = Str::of('fooBar')->kebab();

// foo-bar

`lcfirst` `lcfirst`

lcfirstメソッドは、指定した文字列の最初の文字を小文字にしたものを返します。The lcfirst method returns the given string with the first character lowercased:

use Illuminate\Support\Str;

$string = Str::of('Foo Bar')->lcfirst();

// foo Bar

`length` `length`

lengthメソッドは、文字列の長さを返します。The length method returns the length of the given string:

use Illuminate\Support\Str;

$length = Str::of('Laravel')->length();

// 7

`limit` `limit`

limitメソッドは、指定文字列を指定した長さに切り捨てます。The limit method truncates the given string to the specified length:

use Illuminate\Support\Str;

$truncated = Str::of('The quick brown fox jumps over the lazy dog')->limit(20);

// The quick brown fox...

２番目の引数を渡して、切り捨てた文字列の末尾に追加する文字列を変更することもできます。You may also pass a second argument to change the string that will be appended to the end of the truncated string:

use Illuminate\Support\Str;

$truncated = Str::of('The quick brown fox jumps over the lazy dog')->limit(20, ' (...)');

// The quick brown fox (...)

`lower` `lower`

lowerメソッドは、文字列を小文字に変換します。The lower method converts the given string to lowercase:

use Illuminate\Support\Str;

$result = Str::of('LARAVEL')->lower();

// 'laravel'

`markdown` `markdown`

markdownメソッドはGitHub風マークダウンをHTMLに変換します。The markdown method converts GitHub flavored Markdown into HTML:

use Illuminate\Support\Str;

$html = Str::of('# Laravel')->markdown();

// <h1>Laravel</h1>

$html = Str::of('# Taylor <b>Otwell</b>')->markdown([
    'html_input' => 'strip',
]);

// <h1>Taylor Otwell</h1>

Markdownの安全性Markdown Security

use Illuminate\Support\Str;

Str::of('Inject: <script>alert("Hello XSS!");</script>')->markdown([
    'html_input' => 'strip',
    'allow_unsafe_links' => false,
]);

// <p>Inject: alert(&quot;Hello XSS!&quot;);</p>

`mask` `mask`

maskメソッドは、文字列の一部を繰り返し文字でマスクし、メールアドレスや電話番号など、文字列の一部を難読化するのに使用します。The mask method masks a portion of a string with a repeated character, and may be used to obfuscate segments of strings such as email addresses and phone numbers:

use Illuminate\Support\Str;

$string = Str::of('taylor@example.com')->mask('*', 3);

// tay***************

必要であれば、maskメソッドの第３・４引数に負の数を指定し、文字列の最後から指定する文字数分戻った箇所からマスキングを開始するように指示できます。If needed, you may provide negative numbers as the third or fourth argument to the mask method, which will instruct the method to begin masking at the given distance from the end of the string:

$string = Str::of('taylor@example.com')->mask('*', -15, 3);

// tay***@example.com

$string = Str::of('taylor@example.com')->mask('*', 4, -4);

// tayl**********.com

`match` `match`

matchメソッドは、指定した正規表現パターンに一致する部分文字列を返します。The match method will return the portion of a string that matches a given regular expression pattern:

use Illuminate\Support\Str;

$result = Str::of('foo bar')->match('/bar/');

// 'bar'

$result = Str::of('foo bar')->match('/foo (.*)/');

// 'bar'

`matchAll` `matchAll`

matchAllメソッドは、指定した正規表現パターンに一致した部分文字列を含むコレクションを返します。The matchAll method will return a collection containing the portions of a string that match a given regular expression pattern:

use Illuminate\Support\Str;

$result = Str::of('bar foo bar')->matchAll('/bar/');

// collect(['bar', 'bar'])

正規表現にマッチンググループを指定した場合は、そのグループに一致するコレクションを返します。If you specify a matching group within the expression, Laravel will return a collection of that group's matches:

use Illuminate\Support\Str;

$result = Str::of('bar fun bar fly')->matchAll('/f(\w*)/');

// collect(['un', 'ly']);

一致しなかった場合は、空のコレクションを返します。If no matches are found, an empty collection will be returned.

`isMatch` `isMatch`

isMatchメソッドは、文字列が指定正規表現にマッチした場合にtrueを返します。The isMatch method will return true if the string matches a given regular expression:

use Illuminate\Support\Str;

$result = Str::of('foo bar')->isMatch('/foo (.*)/');

// true

$result = Str::of('laravel')->isMatch('/foo (.*)/');

// false

`newLine` `newLine`

newLineメソッドは、文字列に「行末」コードを追加します。The newLine method appends an "end of line" character to a string:

use Illuminate\Support\Str;

$padded = Str::of('Laravel')->newLine()->append('Framework');

// 'Laravel
//  Framework'

`padBoth` `padBoth`

padBothメソッドはPHPのstr_pad関数をラップし、最後の文字列が目的の長さに達するまで、文字列の両側を別の文字列でパディングします。The padBoth method wraps PHP's str_pad function, padding both sides of a string with another string until the final string reaches the desired length:

use Illuminate\Support\Str;

$padded = Str::of('James')->padBoth(10, '_');

// '__James___'

$padded = Str::of('James')->padBoth(10);

// '  James   '

`padLeft` `padLeft`

padLeftメソッドはPHPのstr_pad関数をラップし、最後の文字列が目的の長さに達するまで、文字列の左側を別の文字列でパディングします。The padLeft method wraps PHP's str_pad function, padding the left side of a string with another string until the final string reaches the desired length:

use Illuminate\Support\Str;

$padded = Str::of('James')->padLeft(10, '-=');

// '-=-=-James'

$padded = Str::of('James')->padLeft(10);

// '     James'

`padRight` `padRight`

padRightメソッドはPHPのstr_pad関数をラップし、最後の文字列が目的の長さに達するまで、文字列の右側を別の文字列でパディングします。The padRight method wraps PHP's str_pad function, padding the right side of a string with another string until the final string reaches the desired length:

use Illuminate\Support\Str;

$padded = Str::of('James')->padRight(10, '-');

// 'James-----'

$padded = Str::of('James')->padRight(10);

// 'James     '

`pipe` `pipe`

pipeメソッドは、現在の値を指定Callableへ渡すことで、文字列を変換します。The pipe method allows you to transform the string by passing its current value to the given callable:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$hash = Str::of('Laravel')->pipe('md5')->prepend('Checksum: ');

// 'Checksum: a5c95b86291ea299fcbe64458ed12702'

$closure = Str::of('foo')->pipe(function (Stringable $str) {
    return 'bar';
});

// 'bar'

`plural` `plural`

pluralメソッドは、単数形の単語文字列を複数形に変換します。この関数は、Laravelの複数形化機能により、どんな言語もサポートしています。The plural method converts a singular word string to its plural form. This function supports any of the languages support by Laravel's pluralizer[/docs/{{version}}/localization#pluralization-language]:

use Illuminate\Support\Str;

$plural = Str::of('car')->plural();

// cars

$plural = Str::of('child')->plural();

// children

use Illuminate\Support\Str;

$plural = Str::of('child')->plural(2);

// children

$plural = Str::of('child')->plural(1);

// child

`position` `position`

positionメソッドは、文字列内で部分文字列が最初に出現する位置を返します。部分文字列が指定した文字列内に存在しない場合は、falseを返します。The position method returns the position of the first occurrence of a substring in a string. If the substring does not exist within the string, false is returned:

use Illuminate\Support\Str;

$position = Str::of('Hello, World!')->position('Hello');

// 0

$position = Str::of('Hello, World!')->position('W');

// 7

`prepend` `prepend`

prependメソッドは、指定値を文字列の先頭へ追加します。The prepend method prepends the given values onto the string:

use Illuminate\Support\Str;

$string = Str::of('Framework')->prepend('Laravel ');

// Laravel Framework

`remove` `remove`

removeメソッドは、指定する値か文字列の配列を文字列から削除します。The remove method removes the given value or array of values from the string:

use Illuminate\Support\Str;

$string = Str::of('Arkansas is quite beautiful!')->remove('quite');

// Arkansas is beautiful!

文字列削除時にケースを無視するため２番目のパラメータへfalseを渡すこともできます。You may also pass false as a second parameter to ignore case when removing strings.

`repeat` `repeat`

repeatメソッドは、指定文字列を繰り返します。The repeat method repeats the given string:

use Illuminate\Support\Str;

$repeated = Str::of('a')->repeat(5);

// aaaaa

`replace` `replace`

replaceメソッドは、文字列中の指定値を置き換えます。The replace method replaces a given string within the string:

use Illuminate\Support\Str;

$replaced = Str::of('Laravel 6.x')->replace('6.x', '7.x');

// Laravel 7.x

$replaced = Str::of('macOS 13.x')->replace(
    'macOS', 'iOS', caseSensitive: false
);

`replaceArray` `replaceArray`

replaceArrayメソッドは、配列を使用して文字列中の指定値を置き換えます。The replaceArray method replaces a given value in the string sequentially using an array:

use Illuminate\Support\Str;

$string = 'The event will take place between ? and ?';

$replaced = Str::of($string)->replaceArray('?', ['8:30', '9:00']);

// The event will take place between 8:30 and 9:00

`replaceFirst` `replaceFirst`

replaceFirstメソッドは、文字列中で最初に現れた指定値を置き換えます。The replaceFirst method replaces the first occurrence of a given value in a string:

use Illuminate\Support\Str;

$replaced = Str::of('the quick brown fox jumps over the lazy dog')->replaceFirst('the', 'a');

// a quick brown fox jumps over the lazy dog

`replaceLast` `replaceLast`

replaceLastメソッドは文字列中で最後に現れた指定値を置き換えます。The replaceLast method replaces the last occurrence of a given value in a string:

use Illuminate\Support\Str;

$replaced = Str::of('the quick brown fox jumps over the lazy dog')->replaceLast('the', 'a');

// the quick brown fox jumps over a lazy dog

`replaceMatches` `replaceMatches`

replaceMatchesメソッドは、パターンに一致する文字列のすべての部分を、指定した置換文字列で置き換えます。The replaceMatches method replaces all portions of a string matching a pattern with the given replacement string:

use Illuminate\Support\Str;

$replaced = Str::of('( 1) 501-555-1000')->replaceMatches('/[^A-Za-z0-9]  /', '')

// '15015551000'

use Illuminate\Support\Str;

$replaced = Str::of('123')->replaceMatches('/\d/', function (array $matches) {
    return '['.$matches[0].']';
});

// '[1][2][3]'

`replaceStart` `replaceStart`

replaceStartメソッドは、指定値が文字列の最初に現れる場合のみ、その値を置き換えます。The replaceStart method replaces the first occurrence of the given value only if the value appears at the start of the string:

use Illuminate\Support\Str;

$replaced = Str::of('Hello World')->replaceStart('Hello', 'Laravel');

// Laravel World

$replaced = Str::of('Hello World')->replaceStart('World', 'Laravel');

// Hello World

`replaceEnd` `replaceEnd`

replaceEndメソッドは、与えられた値が文字列の最後に現れる場合のみ、その値を置き換えます。The replaceEnd method replaces the last occurrence of the given value only if the value appears at the end of the string:

use Illuminate\Support\Str;

$replaced = Str::of('Hello World')->replaceEnd('World', 'Laravel');

// Hello Laravel

$replaced = Str::of('Hello World')->replaceEnd('Hello', 'Laravel');

// Hello World

`scan` `scan`

scan メソッドは、sscanf PHP関数がサポートするフォーマットに従い、文字列からコレクションへの入力をパースします。The scan method parses input from a string into a collection according to a format supported by the sscanf PHP function[https://www.php.net/manual/en/function.sscanf.php]:

use Illuminate\Support\Str;

$collection = Str::of('filename.jpg')->scan('%[^.].%s');

// collect(['filename', 'jpg'])

`singular` `singular`

singularメソッドは、単語を単数形に変換します。この関数は、Laravelの複数形化機能により、どんな言語もサポートしています。The singular method converts a string to its singular form. This function supports any of the languages support by Laravel's pluralizer[/docs/{{version}}/localization#pluralization-language]:

use Illuminate\Support\Str;

$singular = Str::of('cars')->singular();

// car

$singular = Str::of('children')->singular();

// child

`slug` `slug`

slugメソッドは、文字列をURLフレンドリーな「スラグ」へ変換します。The slug method generates a URL friendly "slug" from the given string:

use Illuminate\Support\Str;

$slug = Str::of('Laravel Framework')->slug('-');

// laravel-framework

`snake` `snake`

The snake method converts the given string to snakeメソッドは、文字列をスネークケース（snake_case）へ変換します。The snake method converts the given string to snake_case:

use Illuminate\Support\Str;

$converted = Str::of('fooBar')->snake();

// foo_bar

`split` `split`

splitメソッドは正規表現を使い文字列をコレクションへ分割します。The split method splits a string into a collection using a regular expression:

use Illuminate\Support\Str;

$segments = Str::of('one, two, three')->split('/[\s,] /');

// collect(["one", "two", "three"])

`squish` `squish`

squishメソッドは、単語間の余分な空白を含め、文字列から余分な空白をすべて削除します。The squish method removes all extraneous white space from a string, including extraneous white space between words:

use Illuminate\Support\Str;

$string = Str::of('    laravel    framework    ')->squish();

// laravel framework

`start` `start`

startメソッドは、文字列が指定値で開始されていない場合、その値の単一のインスタンスを追加します。The start method adds a single instance of the given value to a string if it does not already start with that value:

use Illuminate\Support\Str;

$adjusted = Str::of('this/string')->start('/');

// /this/string

$adjusted = Str::of('/this/string')->start('/');

// /this/string

`startsWith` `startsWith`

startsWithメソッドは、文字列が指定値から始まっているかを判定します。The startsWith method determines if the given string begins with the given value:

use Illuminate\Support\Str;

$result = Str::of('This is my name')->startsWith('This');

// true

`stripTags` `stripTags`

stripTagsメソッドは、文字列からすべてのHTMLタグとPHPタグを削除します。The stripTags method removes all HTML and PHP tags from a string:

use Illuminate\Support\Str;

$result = Str::of('<a href="https://laravel.com">Taylor <b>Otwell</b></a>')->stripTags();

// Taylor Otwell

$result = Str::of('<a href="https://laravel.com">Taylor <b>Otwell</b></a>')->stripTags('<b>');

// Taylor <b>Otwell</b>

`studly` `studly`

studlyメソッドは、文字列をアッパーキャメルケース（StudlyCase）へ変換します。The studly method converts the given string to StudlyCase:

use Illuminate\Support\Str;

$converted = Str::of('foo_bar')->studly();

// FooBar

`substr` `substr`

substrメソッドは、引数で指定された開始位置と長さの部分文字列を返します。The substr method returns the portion of the string specified by the given start and length parameters:

use Illuminate\Support\Str;

$string = Str::of('Laravel Framework')->substr(8);

// Framework

$string = Str::of('Laravel Framework')->substr(8, 5);

// Frame

`substrReplace` `substrReplace`

substrReplaceメソッドは、文字列の一部分のテキストを置き換えるもので、第２引数で指定した位置から始まり、第３引数で指定した文字数分を置き換えます。このメソッドの第3引数に0を渡すと、文字列内の既存の文字を一切置き換えることなく、指定された位置に文字列を挿入します。The substrReplace method replaces text within a portion of a string, starting at the position specified by the second argument and replacing the number of characters specified by the third argument. Passing 0 to the method's third argument will insert the string at the specified position without replacing any of the existing characters in the string:

use Illuminate\Support\Str;

$string = Str::of('1300')->substrReplace(':', 2);

// 13:

$string = Str::of('The Framework')->substrReplace(' Laravel', 3, 0);

// The Laravel Framework

`swap` `swap`

swapメソッドは、PHPのstrtr関数を用いて、文字列内の複数の値を置き換えます。The swap method replaces multiple values in the string using PHP's strtr function:

use Illuminate\Support\Str;

$string = Str::of('Tacos are great!')
    ->swap([
        'Tacos' => 'Burritos',
        'great' => 'fantastic',
    ]);

// Burritos are fantastic!

`take` `take`

takeメソッドは、文字列の先頭から指定した文字数を返します。The take method returns a specified number of characters from the beginning of the string:

use Illuminate\Support\Str;

$taken = Str::of('Build something amazing!')->take(5);

// Build

`tap` `tap`

tapメソッドは文字列を指定クロージャへ渡し、その文字列自体に影響を与えずに文字列を調べ操作することができます。クロージャが返す値に関係なく、tapメソッドはオリジナルの文字列を返します。The tap method passes the string to the given closure, allowing you to examine and interact with the string while not affecting the string itself. The original string is returned by the tap method regardless of what is returned by the closure:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('Laravel')
    ->append(' Framework')
    ->tap(function (Stringable $string) {
        dump('String after append: '.$string);
    })
    ->upper();

// LARAVEL FRAMEWORK

`test` `test`

testメソッドは、文字列が指定する正規表現パターンと一致するか判定します。The test method determines if a string matches the given regular expression pattern:

use Illuminate\Support\Str;

$result = Str::of('Laravel Framework')->test('/Laravel/');

// true

`title` `title`

titleメソッドは、文字列をタイトルケース（Title Case）へ変換します。The title method converts the given string to Title Case:

use Illuminate\Support\Str;

$converted = Str::of('a nice title uses the correct case')->title();

// A Nice Title Uses The Correct Case

`toBase64()` `toBase64()`

toBase64メソッドは、指定文字列をBase64に変換します。The toBase64 method converts the given string to Base64:

use Illuminate\Support\Str;

$base64 = Str::of('Laravel')->toBase64();

// TGFyYXZlbA==

`trim` `trim`

trimメソッドは指定文字列をトリムします。PHPネイティブのtrim関数と異なり、Laravelのtrimメソッドはユニコードの空白文字も除去します。The trim method trims the given string. Unlike PHP's native trim function, Laravel's trim method also removes unicode whitespace characters:

use Illuminate\Support\Str;

$string = Str::of('  Laravel  ')->trim();

// 'Laravel'

$string = Str::of('/Laravel/')->trim('/');

// 'Laravel'

`ltrim` `ltrim`

ltrimメソッドは指定文字列の左側をトリムします。PHPネイティブのltrim関数と異なり、Laravelのltrimメソッドはユニコードの空白文字も除去します。The ltrim method trims the left side of the string. Unlike PHP's native ltrim function, Laravel's ltrim method also removes unicode whitespace characters:

use Illuminate\Support\Str;

$string = Str::of('  Laravel  ')->ltrim();

// 'Laravel  '

$string = Str::of('/Laravel/')->ltrim('/');

// 'Laravel/'

`rtrim` `rtrim`

rtrimメソッドは指定文字列の右側をトリムします。PHPネイティブのrtrim関数と異なり、Laravelのrtrimメソッドはユニコードの空白文字も除去します。The rtrim method trims the right side of the given string. Unlike PHP's native rtrim function, Laravel's rtrim method also removes unicode whitespace characters:

use Illuminate\Support\Str;

$string = Str::of('  Laravel  ')->rtrim();

// '  Laravel'

$string = Str::of('/Laravel/')->rtrim('/');

// '/Laravel'

`ucfirst` `ucfirst`

ucfirstメソッドは、文字列の最初の１文字目を大文字にします。The ucfirst method returns the given string with the first character capitalized:

use Illuminate\Support\Str;

$string = Str::of('foo bar')->ucfirst();

// Foo bar

`ucsplit` `ucsplit`

ucsplitメソッドは、指定した文字列を文字列を大文字で分割して配列にします。The ucsplit method splits the given string into a collection by uppercase characters:

use Illuminate\Support\Str;

$string = Str::of('Foo Bar')->ucsplit();

// collect(['Foo', 'Bar'])

`unwrap` `unwrap`

unwrapメソッドは、指定文字列の先頭と末尾から指定文字列を取り除きます。The unwrap method removes the specified strings from the beginning and end of a given string:

use Illuminate\Support\Str;

Str::of('-Laravel-')->unwrap('-');

// Laravel

Str::of('{framework: "Laravel"}')->unwrap('{', '}');

// framework: "Laravel"

`upper` `upper`

upperメソッドは、文字列を大文字に変換します。The upper method converts the given string to uppercase:

use Illuminate\Support\Str;

$adjusted = Str::of('laravel')->upper();

// LARAVEL

`when` `when`

whenメソッドは指定条件がtrueの場合、指定したクロージャを呼び出します。クロージャは、fluent文字列インスタンスを受け取ります。The when method invokes the given closure if a given condition is true. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('Taylor')
                ->when(true, function (Stringable $string) {
                    return $string->append(' Otwell');
                });

// 'Taylor Otwell'

必要であれば、３番目のパラメータとして別のクロージャをwhenメソッドに渡せます。このクロージャは、条件パラメータがfalseと評価された場合に実行します。If necessary, you may pass another closure as the third parameter to the when method. This closure will execute if the condition parameter evaluates to false.

`whenContains` `whenContains`

whenContainsメソッドは、文字列が指定値を含んでいる場合に、渡したクロージャを呼び出します。クロージャは、Fluent文字列のインスタンスを受け取ります。The whenContains method invokes the given closure if the string contains the given value. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('tony stark')
            ->whenContains('tony', function (Stringable $string) {
                return $string->title();
            });

// 'Tony Stark'

必要であれば、whenメソッドの第３パラメータへ、もう一つクロージャを渡せます。このクロージャは、文字列が指定値を含んでいない場合に実行されます。If necessary, you may pass another closure as the third parameter to the when method. This closure will execute if the string does not contain the given value.

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('tony stark')
            ->whenContains(['tony', 'hulk'], function (Stringable $string) {
                return $string->title();
            });

// Tony Stark

`whenContainsAll` `whenContainsAll`

whenContainsAllメソッドは、文字列が指定する部分文字列をすべて含んでいる場合に、指定クロージャを呼び出します。クロージャは、Fluent文字列のインスタンスを受け取ります。The whenContainsAll method invokes the given closure if the string contains all of the given sub-strings. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('tony stark')
                ->whenContainsAll(['tony', 'stark'], function (Stringable $string) {
                    return $string->title();
                });

// 'Tony Stark'

`whenEmpty` `whenEmpty`

文字列が空の場合、whenEmptyメソッドは指定されたクロージャを呼び出します。クロージャが値を返す場合、その値をwhenEmptyメソッドも返します。クロージャが値を返さない場合、fluent文字列インスタンスを返します。The whenEmpty method invokes the given closure if the string is empty. If the closure returns a value, that value will also be returned by the whenEmpty method. If the closure does not return a value, the fluent string instance will be returned:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('  ')->whenEmpty(function (Stringable $string) {
    return $string->trim()->prepend('Laravel');
});

// 'Laravel'

`whenNotEmpty` `whenNotEmpty`

whenNotEmptyメソッドは文字列が空でない場合、指定するクロージャを呼び出します。クロージャが値を返す場合は、whenNotEmptyメソッドもその値を返します。クロージャが値を返さない場合は、Fluent文字列インスタンスを返します。The whenNotEmpty method invokes the given closure if the string is not empty. If the closure returns a value, that value will also be returned by the whenNotEmpty method. If the closure does not return a value, the fluent string instance will be returned:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('Framework')->whenNotEmpty(function (Stringable $string) {
    return $string->prepend('Laravel ');
});

// 'Laravel Framework'

`whenStartsWith` `whenStartsWith`

whenStartsWithメソッドは、文字列が指定する部分文字列から始まる場合に、指定クロージャを呼び出します。クロージャは、Fluent文字列インスタンスを受け取ります。The whenStartsWith method invokes the given closure if the string starts with the given sub-string. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('disney world')->whenStartsWith('disney', function (Stringable $string) {
    return $string->title();
});

// 'Disney World'

`whenEndsWith` `whenEndsWith`

whenEndsWithメソッドは、文字列が指定した部分文字列で終了する場合に、指定クロージャを呼び出します。クロージャは、Fluent文字列インスタンスを受け取ります。The whenEndsWith method invokes the given closure if the string ends with the given sub-string. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('disney world')->whenEndsWith('world', function (Stringable $string) {
    return $string->title();
});

// 'Disney World'

`whenExactly` `whenExactly`

whenExactlyメソッドは、文字列が指定文字列と厳密に一致する場合に、指定クロージャを呼び出します。クロージャは、Fluent文字列インスタンスを受け取ります。The whenExactly method invokes the given closure if the string exactly matches the given string. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('laravel')->whenExactly('laravel', function (Stringable $string) {
    return $string->title();
});

// 'Laravel'

`whenNotExactly` `whenNotExactly`

whenNotExactlyメソッドは、文字列が指定文字列と厳密に一致しない場合に、指定クロージャを呼び出します。クロージャは、Fluent文字列インスタンスを受け取ります。The whenNotExactly method invokes the given closure if the string does not exactly match the given string. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('framework')->whenNotExactly('laravel', function (Stringable $string) {
    return $string->title();
});

// 'Framework'

`whenIs` `whenIs`

whenIsメソッドは、文字列が与えられたパターンにマッチする場合、指定クロージャを呼び出します。アスタリスクはワイルドカードとして使用できます。クロージャはFluent文字列インスタンスを受け取ります。The whenIs method invokes the given closure if the string matches a given pattern. Asterisks may be used as wildcard values. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('foo/bar')->whenIs('foo/*', function (Stringable $string) {
    return $string->append('/baz');
});

// 'foo/bar/baz'

`whenIsAscii` `whenIsAscii`

whenIsAsciiメソッドは、文字列が7bitのASCIIの場合、クロージャを呼び出します。クロージャはFluent文字列インスタンスを受け取ります。The whenIsAscii method invokes the given closure if the string is 7 bit ASCII. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('laravel')->whenIsAscii(function (Stringable $string) {
    return $string->title();
});

// 'Laravel'

`whenIsUlid` `whenIsUlid`

whenIsUlidメソッドは、文字列が有効なULIDである場合、指定するクロージャを呼び出します。クロージャは、Fluent文字列のインスタンスを受け取ります。The whenIsUlid method invokes the given closure if the string is a valid ULID. The closure will receive the fluent string instance:

use Illuminate\Support\Str;

$string = Str::of('01gd6r360bp37zj17nxb55yv40')->whenIsUlid(function (Stringable $string) {
    return $string->substr(0, 8);
});

// '01gd6r36'

`whenIsUuid` `whenIsUuid`

whenIsUuidメソッドは、文字列が有効なUUIDである場合、指定クロージャを呼び出します。クロージャは、Fluent文字列インスタンスを受け取ります。The whenIsUuid method invokes the given closure if the string is a valid UUID. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('a0a2a2d2-0b87-4a18-83f2-2529882be2de')->whenIsUuid(function (Stringable $string) {
    return $string->substr(0, 8);
});

// 'a0a2a2d2'

`whenTest` `whenTest`

whenTestメソッドは、文字列が正規表現にマッチする場合、指定クロージャを呼び出します。クロージャはFluent文字列インスタンスを受け取ります。The whenTest method invokes the given closure if the string matches the given regular expression. The closure will receive the fluent string instance:

use Illuminate\Support\Str;
use Illuminate\Support\Stringable;

$string = Str::of('laravel framework')->whenTest('/laravel/', function (Stringable $string) {
    return $string->title();
});

// 'Laravel Framework'

`wordCount` `wordCount`

wordcountメソッドは、文字列に含まれる単語の数を返します。The wordCount method returns the number of words that a string contains:

use Illuminate\Support\Str;

Str::of('Hello, world!')->wordCount(); // 2

`words` `words`

wordsメソッドは、文字列内の単語数を制限します。必要に応じ、切り捨てた文字列に追加する文字列を指定できます。The words method limits the number of words in a string. If necessary, you may specify an additional string that will be appended to the truncated string:

use Illuminate\Support\Str;

$string = Str::of('Perfectly balanced, as all things should be.')->words(3, ' >>>');

// Perfectly balanced, as >>>

Laravel 11.x 文字列

イントロダクションIntroduction

利用可能なメソッドAvailable Methods

文字列Strings

Fluent文字列Fluent Strings

文字列Strings

__() __()

class_basename() class_basename()

e() e()

preg_replace_array() preg_replace_array()

Str::after() Str::after()

Str::afterLast() Str::afterLast()

Str::apa() Str::apa()

Str::ascii() Str::ascii()

Str::before() Str::before()

Str::beforeLast() Str::beforeLast()

Str::between() Str::between()

Str::betweenFirst() Str::betweenFirst()

Str::camel() Str::camel()

Str::charAt() Str::charAt()

Str::contains() Str::contains()

Str::containsAll() Str::containsAll()

Str::endsWith() Str::endsWith()

Str::excerpt() Str::excerpt()

Str::finish() Str::finish()

Str::headline() Str::headline()

Str::inlineMarkdown() Str::inlineMarkdown()

Markdownの安全性Markdown Security

Str::is() Str::is()

Str::isAscii() Str::isAscii()

Str::isJson() Str::isJson()

Str::isUrl() Str::isUrl()

Str::isUlid() Str::isUlid()

Str::isUuid() Str::isUuid()

Str::kebab() Str::kebab()

Str::lcfirst() Str::lcfirst()

Str::length() Str::length()

Str::limit() Str::limit()

Str::lower() Str::lower()

Str::markdown() Str::markdown()

Markdownの安全性Markdown Security

Str::mask() Str::mask()

Str::orderedUuid() Str::orderedUuid()

Str::padBoth() Str::padBoth()

Str::padLeft() Str::padLeft()

Str::padRight() Str::padRight()

Str::password() Str::password()

Str::plural() Str::plural()

Str::pluralStudly() Str::pluralStudly()

Str::position() Str::position()

Str::random() Str::random()

Str::remove() Str::remove()

Str::repeat() Str::repeat()

Str::replace() Str::replace()

Str::replaceArray() Str::replaceArray()

Str::replaceFirst() Str::replaceFirst()

Str::replaceLast() Str::replaceLast()

Str::replaceMatches() Str::replaceMatches()

Str::replaceStart() Str::replaceStart()

Str::replaceEnd() Str::replaceEnd()

Str::reverse() Str::reverse()

Str::singular() Str::singular()

Str::slug() Str::slug()

Str::snake() Str::snake()

Str::squish() Str::squish()

Str::start() Str::start()

Str::startsWith() Str::startsWith()

Str::studly() Str::studly()

Str::substr() Str::substr()

Str::substrCount() Str::substrCount()

Str::substrReplace() Str::substrReplace()

Str::swap() Str::swap()

Str::take() Str::take()

Str::title() Str::title()

Str::toBase64() Str::toBase64()

Str::toHtmlString() Str::toHtmlString()

Str::trim() Str::trim()

Str::ltrim() Str::ltrim()

Str::rtrim() Str::rtrim()

Str::ucfirst() Str::ucfirst()

`()` `()`

`class_basename()` `class_basename()`

`e()` `e()`

`preg_replace_array()` `preg_replace_array()`

`Str::after()` `Str::after()`

`Str::afterLast()` `Str::afterLast()`

`Str::apa()` `Str::apa()`

`Str::ascii()` `Str::ascii()`

`Str::before()` `Str::before()`

`Str::beforeLast()` `Str::beforeLast()`

`Str::between()` `Str::between()`

`Str::betweenFirst()` `Str::betweenFirst()`

`Str::camel()` `Str::camel()`

`Str::charAt()` `Str::charAt()`

`Str::contains()` `Str::contains()`

`Str::containsAll()` `Str::containsAll()`

`Str::endsWith()` `Str::endsWith()`

`Str::excerpt()` `Str::excerpt()`

`Str::finish()` `Str::finish()`

`Str::headline()` `Str::headline()`

`Str::inlineMarkdown()` `Str::inlineMarkdown()`

`Str::is()` `Str::is()`

`Str::isAscii()` `Str::isAscii()`

`Str::isJson()` `Str::isJson()`

`Str::isUrl()` `Str::isUrl()`

`Str::isUlid()` `Str::isUlid()`

`Str::isUuid()` `Str::isUuid()`

`Str::kebab()` `Str::kebab()`

`Str::lcfirst()` `Str::lcfirst()`

`Str::length()` `Str::length()`

`Str::limit()` `Str::limit()`

`Str::lower()` `Str::lower()`

`Str::markdown()` `Str::markdown()`

`Str::mask()` `Str::mask()`

`Str::orderedUuid()` `Str::orderedUuid()`

`Str::padBoth()` `Str::padBoth()`

`Str::padLeft()` `Str::padLeft()`

`Str::padRight()` `Str::padRight()`

`Str::password()` `Str::password()`

`Str::plural()` `Str::plural()`

`Str::pluralStudly()` `Str::pluralStudly()`

`Str::position()` `Str::position()`

`Str::random()` `Str::random()`

`Str::remove()` `Str::remove()`

`Str::repeat()` `Str::repeat()`

`Str::replace()` `Str::replace()`

`Str::replaceArray()` `Str::replaceArray()`

`Str::replaceFirst()` `Str::replaceFirst()`

`Str::replaceLast()` `Str::replaceLast()`

`Str::replaceMatches()` `Str::replaceMatches()`

`Str::replaceStart()` `Str::replaceStart()`

`Str::replaceEnd()` `Str::replaceEnd()`

`Str::reverse()` `Str::reverse()`

`Str::singular()` `Str::singular()`

`Str::slug()` `Str::slug()`

`Str::snake()` `Str::snake()`

`Str::squish()` `Str::squish()`

`Str::start()` `Str::start()`

`Str::startsWith()` `Str::startsWith()`

`Str::studly()` `Str::studly()`

`Str::substr()` `Str::substr()`

`Str::substrCount()` `Str::substrCount()`

`Str::substrReplace()` `Str::substrReplace()`

`Str::swap()` `Str::swap()`

`Str::take()` `Str::take()`

`Str::title()` `Str::title()`

`Str::toBase64()` `Str::toBase64()`

`Str::toHtmlString()` `Str::toHtmlString()`

`Str::trim()` `Str::trim()`

`Str::ltrim()` `Str::ltrim()`

`Str::rtrim()` `Str::rtrim()`

`Str::ucfirst()` `Str::ucfirst()`

`Str::ucsplit()` `Str::ucsplit()`

`Str::upper()` `Str::upper()`

`Str::ulid()` `Str::ulid()`

`Str::unwrap()` `Str::unwrap()`

`Str::uuid()` `Str::uuid()`

`Str::wordCount()` `Str::wordCount()`

`Str::wordWrap()` `Str::wordWrap()`

`Str::words()` `Str::words()`